Vapor Product Spotlight – Infinite Cartel MMXIII Clone Mechanical E-Cigarette Mod

Vapor Product Spotlight – Infinite Cartel MMXIII Clone Mechanical E-Cigarette Mod


Hey there vape fans! Welcome back to another
Mt Baker Vapor Product Spotlight, I’m Chaps
and today we’re going to be talking about
the Cartel Clone by Infinite. Alrighty, so
when you first get your Cartel mod it’s going
to come in this little snazzy box here with
this great little silver lettering on here.
We’re going to try and make it to where it
doesn’t glare into the camera to much. But,
you just take the box apart here and it’s
going to come with these three tubes here.
Alright, so obviously that’s for the different
sizes of battery that you’re going to be using.
And so for today we’re going to be working
with the 18650 tube. I’ll just go ahead and
pull that guy out here, and now you’ve got
two different threaded ends. One end, this
end specifically is gonna be a little bit
fatter than the other one. And then you’ve
got this narrow tube in here, and this is
actually going to come with your 510 connection
and your firing button as well. So the first
thing you’ll do is you’ll just take those
off. So now that you have your actual end
pieces off here, that is the 510 connection
and the firing button, what you’re going to
want to do is you’re gonna wanna take your
18650 size tube out there, and you’re gonna
want to make sure that this part here, this
is your actual pin, is adjusted down just
a little bit, because you want to make sure
that it’s going to make contact with your
18650 battery. So a button top obviously is
going to be a little bit higher up than a
flat top. Today we’re using a flat top battery
so we’re gonna go ahead and have that down
just a little further, just about right there.
This is flush and this is about where we want
it. Okay, so then we’ll go ahead and thread
the 510 connection right on to the fatter
side of the threads, because it’s just slightly
tapered. Barely noticeable when you look at
it, but it is slightly tapered, it’s a little
heftier on this end. So you’ll go ahead and
grab your battery, take your firing button,
thread that in. A little battery rattle is
normal, you don’t want too much of that though.
If it’s shaking around too much then when
you press the firing button it’s not going
to make contact with that top pin there and
you know, you’re just not going to have a
good time. So then, because it’s a 510 connection
you’re gonna want to use a 510 connection
RDA here. We’ll go ahead and just thread that
on here. And that’s the Cartel clone by Infinite.
This is a great quality product, low voltage
drop like I said. It’s just a fantastic mod
to use, especially if you’re a seasoned mechanical
mod user, or you know brand new to it. It’s
just solid and it’s beautiful. So as always
if you have any questions or concerns please
leave them in the comment field below. Don’t
forget to like and subscribe to our video,
and make sure you share it with your friends.
Thanks again for watching Mt Baker Vapor Product
Spotlights. Again my name is Chaps. Happy
Vaping.

3 thoughts on “Vapor Product Spotlight – Infinite Cartel MMXIII Clone Mechanical E-Cigarette Mod

  • Nice battery tube! Do some juice mixes like some of your DIY stuff .Love your juice n prices are great better then most anywhere. Show what some employees vape?

  • Hi, I have the changling mech mod and plume veil RDA and don't get near the same vapor production. I vape y'all's juice 50 pg 50 vg. Any suggestions on how to get more vapor clouds?

  • Just got this fromA friend of mine I never got into mods really am I able to use any tank like the Atlantis etc on this mod? Thank you sincerely inexperienced vaper

Leave a Reply

Leave a Reply

Your email address will not be published. Required fields are marked *