How to Clean Your Vape | Pre Made Coils & Rebuildable Coils

How to Clean Your Vape | Pre Made Coils & Rebuildable Coils


– What’s up guys my name is
Gabriel and I’m with VapeWild
We’re here to talk about
cleaning your coils,
but before you do that make sure that you
subscribe to our channel and
click the little bell icon
so you can stay up to date
with all of our new videos.
First we’re going to
talk about rebuildables,
but there is a time stamp
down in the description
for you to skip forward to prebuilt coils.
Rebuildable coils get gunked up.
We get it bro, you vape.
The first thing that you want
to do is to take the wick out
of the coils so all you have
is just the coil, the deck,
or the coils and the deck.
The next thing you want to do
is raise your wattage
about 10, maybe 15 watts,
wherever you’re comfortable.
And then you want to start
pulsing the fire button
and holding it down for a quick second,
to loosen up the gunk and
the remaining eLiquid.
The coils need to be burning bright orange
in order to make the
eLiquid flake on the coil.
You can blow them away,
but the most effective way to do this
is to go ahead and dunk it in water
or run it under a faucet.
You’re gonna notice that there’s
some gunk remaining in the coil
make sure you have a
toothbrush, it’s the best way,
go ahead and give it a light swipe over it
should be gone, should be fine.
To get all the water dried
out of the RBA head itself
you can use some spare cotton
or even a microfiber cloth
to soak it all up and a great
way to dry the coil itself
is to just repulse it again
until it’s burning hot,
the water will evaporate.
When you’re using prebuilt coils
and you want to get the most out of them,
here’s what you do:
You take the coil out of
the base of tank first,
then you let it soak in
water, vinegar, even ethanol,
or even cheap vodka, for
about two, maybe three hours.
Let them sit there and soak,
and then rinse them out
thoroughly with water.
Put the prebuilt coil on a
microfiber cloth or paper towel
and let it sit there for about
a full day before you use it,
you want to make sure that it’s fully dry.
If you notice that there’s till some gunk
on the wire itself you can take a Qtip
to the inside of that and kind
of wisp it away a little bit.
It’s pretty easy.
If you would rather not chance it with
either vodka or vinegar you can always
boil water on a stove
and let them sit in that
for about 30 minutes.
If you feel it’s necessary
you can still take a Qtip to the wire
to get rid of the remaining gunk.
In the meantime, make sure
you have a prebuilt coil
that you can use because
it’s going to take
about a day for it to
completely dry through
sometimes even two.
There you have it friends,
your vape is clean
and you’re ready to go!
For details not mentioned in
this video visit our blog,
there’s a link down in
the description for you.
If you haven’t done so already,
make sure that you
subscribe to your channel
so that you can stay up to date
with all of our new videos.
We make a lot of crazy stuff for you.
So, thank you again,
so much for your time,
I really appreciate you
hanging out with me.

5 thoughts on “How to Clean Your Vape | Pre Made Coils & Rebuildable Coils

Leave a Reply

Leave a Reply

Your email address will not be published. Required fields are marked *