ECola E Cigarette Mod od GD

ECola E Cigarette Mod od GD


ECola E-Cigarette Mod,
4000 mAh Power Bank from Gold Drive
Hi and welcome to the video about
a bit funny item, produced by SMY company.
It´s a funny ECola.
Let´s have a look
inside the magic tube.
Prepared by SMY for us.
So, there´s an ECola
mod itself, which looks like this.
Here, you can choose from
two designs to decorate your mod.
What else we can find in the packing.
There´s an original atomizer,
which we will talk about later as well.
A cable for charging the
mod or any MicroUSB device.
Adapter 220V and USB.
A brief manual in
English hidden in the cap.
Also an extra head
for the original atomizer.
We can put the case away for now.
Let´s see the ECola mod now.
Let´s see the weight… 250g.
Capacity 4000 mAh which may be used to
charge our mobiles and so on… from USB port.
Here, you can switch the mod on/off.
You can see it here as well on/off.
Here, output, USB port for charging.
Here, input, MicroUSB port for
charging the accumulator inside.
Let´s switch on.
Here, you can see the heating switch
that came alive and flashed two times shortly.
This switch is also used
for heating when vaping.
With a five-click you can lock
and the switch will flash three times.
Now, it´s locked.
And now unlocked.
Before talking about the
functions, let´s check the charging first.
Connect the cable to
a USB port and also here…
…charging is
going on… red light is on.
When charging is finished, green light
comes on and charging automatically stops.
So, that´s charging
the mod´s accumulator.
And it is possible to charge
for example our mobiles as well.
It is simple.
The switch must be ON
when used as a power bank.
Connect the cable, the red light
comes on, indicating that it is working.
Connect to your mobile, for example,
red lights comes on here, charging is on.
Simple.
Now, it is ready for vaping again.
Now, we should have a look at this
original atomizer that comes with ECola mod.
You can disassemble it like this.
The tip, tube for filling and
the heating head inside this tube.
The tube has a 510 threading
and screws inside ECola mod.
We can fill in some liquid now as well.
On the side, gently.
Until this little tube, of course.
Ok, enough, let´s close it.
Let it soak up and
we are ready to vape.
I will show you one more
thing after it comes on the mod.
So, the mod is on and ready for vaping.
But we have to find the place
where to screw in this original atomizer.
By turning the cap like this, you will see the
opening for the atomizer and you can screw it in.
Screw the atomizer in tightly.
Now, it´s ready for vaping.
Ok, it´s alive.
In case you don´t want to vape anymore,
just screw the driptip in like this, it hides inside.
Push the atomizer inside,
close the cap…and you can go.
Cool and fine…this is how it works.
So, let´s try how it vapes.
Filled, tried…
So, let´s switch it on, open,
take out, screw the tip, and vape.
You can recognize the
atomizer with a bottom heating, so ok..
So, this is the funny ECola, also working
as a power bank with the capacity of 4000 mAh.
Have a nice time and see you
again at some of my future videos.
For Gold Drive made by Vorel Vaping Film´s.

3 thoughts on “ECola E Cigarette Mod od GD

Leave a Reply

Leave a Reply

Your email address will not be published. Required fields are marked *